Home/Products/Triangular Wire/Triangular Wire 2mm (Custom)
Triangular Wire 2mm (Custom)
Custom stainless triangular wire, 2 mm across flats. Tip radius, angle and tolerance drawn to your screen for fine slots and filter elements.
Triangular Wire 2mm (Custom)
Custom stainless triangular wire, 2 mm across flats. Tip radius, angle and tolerance drawn to your screen for fine slots and filter elements.
| Material | 304 / 316L / 430 stainless steel |
|---|---|
| Size range | 2.0 mm across flats (0.8-4.0 mm on request) |
| Typical application | Fine screens, filter elements, sieves |
| Cross-section | Square — also drawn to your drawing |
| Surface | Bright drawn, as required |
| Packing | Coil, spool or straight length |
Two millimetres is where triangular wire stops being a screen wire and starts being a precision part. At this size the slot is measured in fractions of a millimetre, and the tip radius — not just the across-flats size — decides how the slot behaves.
We draw 2 mm triangular wire to your drawing rather than a catalogue number: the top face width, the included angle, the corner radius and the tolerance are all set by what the screen has to do. A sharper tip gives a cleaner slot; a small radius keeps the edge from chipping when the wire is handled or welded.
Specifications
| Material | 304 / 316L / 430 stainless steel |
|---|---|
| Across flats | 2.0 mm (0.8–4.0 mm range on request) |
| Tip radius | Per drawing — sharp to 0.2 mm |
| Tolerance | ±0.02 mm typical |
| Surface | Bright-drawn, or bright-annealed |
| Supply | Coil, or pre-cut to length |
| Use | Fine screens, filter elements, sieves, oil screens |
For coarser work the 3.0 mm section is the usual starting point; 2 mm is for slots that need to be finer. See the full triangular wire range, or send the drawing and we will confirm the tip radius and tolerance.
Related products
Ready to start your project?
Send us your drawing or sample — we reply within 24 hours on working days.