Home/Products/Wedge Wire/Wire Wrapped Screen Jackets
Wire Wrapped Screen Jackets
The wrapped jacket without the assembly: continuous all-welded V-wire on a plain core, OD held to thread-mating tolerance, gauge measured and certified slot by slot. For screen shops the wrap is not their business.
Wire Wrapped Screen Jackets
The wrapped jacket without the assembly: continuous all-welded V-wire on a plain core, OD held to thread-mating tolerance, gauge measured and certified slot by slot. For screen shops the wrap is not their business.
| Material | 304L / 316L / 2205 / 2507 duplex / C276; triangular V-wire 0.75-3 mm |
|---|---|
| Size range | Jacket OD 60-178 mm, slot 0.15-1.00 mm, gauge +/-0.05 mm per slot; supplied jacket-only, on plain pipe, or gauge-certified per batch |
| Typical application | For screen assemblers and completion companies: jacket-only supply for threading onto your own base pipe, jacket batches for screen shops, replacement jackets for workover stock |
| Cross-section | Square — also drawn to your drawing |
| Surface | Bright drawn, as required |
| Packing | Coil, spool or straight length |
Not everyone who needs a wire wrapped jacket wraps screens. Screen shops assemble complete completions but buy the wrapped element in; workover crews hold spare jackets against known well stock; completion companies thread jackets onto base pipe they have already perforated and threaded elsewhere. For all of them the wrapped jacket is the bought component — and it is bought on two things: outside diameter that actually mates with their thread, and a slot gauge they can trust downhole.
What a jacket-only order changes
Building a jacket without the customer's base pipe shifts the critical dimensions. The jacket's ID becomes the free variable, set to clear the core pipe it will be threaded over — with the radial clearance agreed, not guessed, because a jacket that rattles on its core wears its end connections and a jacket that will not go on stops an assembly line. OD stays on the thread-mating tolerance. The wrap itself is unchanged: continuous V-wire, welded at every bar crossing, ends faced square.
| Jacket OD | 60–178 mm (2 3/8"–7" equivalents) |
|---|---|
| Slot | 0.15–1.00 mm, measured at the outside face |
| Gauge tolerance | +/-0.05 mm, verified slot by slot, certificate per jacket |
| ID / radial clearance | Set to your core pipe with agreed clearance |
| Lengths | Standard joint lengths or cut to order; end facing square |
| Batch documents | Wrap wire heats, gauge certificates, weld inspection record |
Gauge, certified jacket by jacket
A jacket that goes downhole carries the same sand-retention responsibility as a finished screen, and the same rule applies: the slot is measured at the outside face of the wound jacket, per turn, against the ordered size — the method is the one described on the wire wrapped sand control screens page. Batch orders ship with the gauge record for every jacket, plus the wrap wire heat numbers, so a workover jacket pulled from stock years later still traces to its certificate. Slot sizing logic, for orders where we also advise, is in the slot size article.
Materials and volume
304L covers standard water and light oil duty; chloride and thermal wells take duplex; sour and acid-stimulated wells take C276, with the same wetted-alloy-matching rule as finished screens. For screen shops running their own wrap for standard jobs, we also supply the V-profile wire itself — jackets make sense where gauge certification, duplex or C276 drawing, or batch volume justify buying the element rather than winding it.
Send the jacket OD, slot, length and annual quantity, and the quotation will separate the tooling answer from the per-jacket price — standard sections off existing tooling price by the piece; a new slot or OD is a die decision first, a price second.
Related products
Ready to start your project?
Send us your drawing or sample — we reply within 24 hours on working days.